Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 298

296
Breakdown assistance
* NOTE Damage due to excessive tractive
power
If you pull away sharply, the tractive power
may be too high and the vehicles could be
damaged.
Pull away slowly and smoothly.
#
Towing a vehicle with the front or rear axle
raised
* NOTE Damage when the ignition is
switched on
If you leave the ignition switched on when
towing the vehicle with the front or rear axle
®
raised, ESP actuation can damage the brake
system.
The ignition must be switched off.
#
* NOTE Damage due to incorrect removal
or installation of the propeller shafts
When installing the propeller shafts, they can
be damaged if you do not use new screws.
Always use new screws when installing the
propeller shafts.
Only have the propeller shafts installed or
removed by qualified, skilled personnel.
%
If the front axle is damaged, raise the vehicle
at the front axle and if the rear axle is dam‐
aged, raise the vehicle at the rear axle.
% Vehicles with automatic transmission
and rear wheel drive: if there is a malfunc‐
tion, the automatic transmission may be
locked in position j.
If the automatic transmission cannot be shif‐
ted to position i, transport the vehicle
( page 296). A towing vehicle with lifting
→
equipment is required for vehicle transport.
% Vehicles with automatic transmission
and front wheel drive: if there is a malfunc‐
tion, the automatic transmission may be
locked in position j. You can release the
parking lock manually (
If the automatic transmission cannot be shif‐
ted to position i, transport the vehicle
( page 296). A towing vehicle with lifting
→
equipment is required for vehicle transport.
Observe the notes on permissible towing
#
methods ( page 293).
→
page 126).
→
The propeller shafts to the drive axles must
#
be removed if the maximum permissible tow‐
ing distance is exceeded.
Vehicles with automatic transmission:
#
shift the automatic transmission to position
i.
Vehicles with manual transmission: shift
#
to neutral i.
Release the parking brake.
#
Switch off the ignition.
#
Loading the vehicle for transport
Observe the notes on towing away
#
( page 294) ( page 296).
→ →
Connect the tow bar to the towing eye to load
#
the vehicle.
Vehicles with automatic transmission:
#
shift the automatic transmission to position
i.
%
Vehicles with automatic transmission: in
the event of damage to the electrics, the
automatic transmission may be locked in
position j. To shift to i provide the on-
board electrical system with power
( page 286).
→
Vehicles with manual transmission: shift
#
to neutral i.
Load the vehicle onto the transporter.
#
Vehicles with automatic transmission:
#
shift the automatic transmission to position
j.
Vehicles with manual transmission:
#
engage first 1 or reverse gear k.
Use the parking brake to secure the vehicle
#
against rolling away.
Only secure the vehicle by the wheels.
#
Vehicles with all-wheel drive/vehicles with
automatic transmission