Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 276

274
Maintenance and care
OM642
Turn cap 1 anti-clockwise and remove it.
#
Top up the engine oil.
#
Replace cap 1 and turn it clockwise until it
#
engages.
Check the oil level again .
#
Checking the coolant level
& WARNING Danger of burns from hot
component parts in the engine compart‐
ment
Certain component parts in the engine com‐
partment may be very hot, e.g. the engine,
the radiator and parts of the exhaust system.
Let the engine cool down and only
#
touch the component parts described
below:
If you have to carry out any work in the engine
compartment, touch only the following compo‐
nents:
bonnet
R
engine oil filler opening cap
R
washer fluid reservoir cap
R
coolant expansion reservoir cap
R
& WARNING Danger of burns when open‐
ing the bonnet
If you open the engine bonnet when the
engine has overheated or during a fire in the
engine compartment, you could come into
contact with hot gases or other escaping
operating fluids.
Before opening the bonnet, allow the
#
engine to cool down.
In the event of a fire in the engine com‐
#
partment, keep the engine bonnet
closed and call the fire service.
& WARNING Risk of scalding from hot
coolant
The engine cooling system is pressurised,
particularly when the engine is warm. If you
open the cap, you could be scalded by hot
coolant spraying out.
Let the engine cool down before open‐
#
ing the cap.
When opening the cap, wear protective
#
gloves and safety glasses.
Open the cap slowly to release pres‐
#
sure.
* NOTE Paintwork damage due to coolant
If coolant gets on painted surfaces, the paint‐
work can be damaged.
Add coolant carefully.
#
Remove spilled coolant.
#
Checking the coolant level
Example: coolant expansion reservoir
Park the vehicle on an even surface.
#
Open the bonnet (
→
#
Slowly turn the coolant expansion reservoir
#
cap 1 half a turn anti-clockwise and allow
excess pressure to escape.
page 270).