Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 219

Select a POI.
#
The destination address is shown. The route
can be calculated.
Other menu functions
To save the destination: select f .
#
Select an option.
#
The following options are available for you:
Save in "Previous destinations"
R
Save as favourite
R
Save as "Home"
R
Save as "Work"
R
If both addresses are saved and the com‐
muter route is activated, the multimedia
system starts route guidance without nav‐
igation announcements.
To call the destination: if a telephone num‐
#
ber is available, select Call.
To share the destination using NFC or QR
#
code: select Share via NFC or QR
Hold the NFC area of the mobile phone (see
#
manufacturer's operating instructions) on the
mat or place the mobile phone on it
( page 237).
→
or
Hold the mobile phone near to the multimedia
#
system and scan the QR code.
To call up an Internet address: if a web
#
address is available, select www.
To show on the map: select
#
Selecting a route type
Requirements:
For use of a commuter route: you have cre‐
R
ated a profile ( page 197).
→
The Allow destination suggestions
R
switched on ( page 198).
→
The Activate commuter route
R
switched on ( page 220).
→
The multimedia system has gathered suffi‐
R
cient data in order to show destination sug‐
gestions.
Routes have been learned for these destina‐
R
tion suggestions.
Multimedia system:
,
tion)
tings
#
The following route types are available:
R
R
R
code.
R
The dynamic route can be switched on or off for
Display on map.
the route types named:
R
option is
option is
R
R
MBUX multimedia system
© Navigation
.
Route Icon Route
. .
Select the route type.
If no route has been created, the next route is
calculated on the basis of the new route type.
If a route has already been created, the route
is calculated on the basis of the new route
type.
Fast route
A route with a quick journey time is calcula‐
ted.
Short route
A route with a short driving distance is calcu‐
lated.
Eco route
An economical route is calculated. The jour‐
ney time may be somewhat longer than for
quicker routes.
TRAILER
The option is available if a trailer has been
coupled with the vehicle.
A prompt is shown in the multimedia system.
Confirm the prompt.
The route is optimised for trailer operation.
Automatic
The route is calculated with the currently set
route type.
Traffic messages via Live Traffic Information
or FM RDS-TMC are taken into account
( page 225).
→
Live Traffic Information and FM RDS-TMC are
not available in all countries.
After asking
A prompt appears when a new route is detec‐
ted with a shorter journey time based on traf‐
fic reports. You can continue to use the cur‐
rent route or use the dynamic route instead
( page 227).
→
Off
No traffic reports are taken into account for
the route.
217
(Naviga‐
Route set-
.