Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 342

340
Technical data
Observe the notes on paintwork/matt finish
paintwork care ( page 278).
→
Have the brake fluid replaced regularly at a quali‐
fied specialist workshop.
Only use brake fluid approved by Mercedes-Benz
in accordance with MB-Freigabe or MB-Approval
331.0.
Further information on brake fluid:
in the Mercedes-Benz Specification for
R
Service Products at http://bevo.mercedes-
benz.com
at a qualified specialist workshop
R
Coolant
Notes on coolant
Observe the notes on operating fluids
( page 335).
→
& WARNING Risk of fire‑ and injury from
antifreeze
If antifreeze comes into contact with hot com‐
ponent parts in the engine compartment, it
may ignite.
Allow the engine to cool down before
#
you top up the antifreeze.
Make sure that no antifreeze spills out
#
next to the filler opening.
Thoroughly clean the antifreeze from
#
component parts before starting the
vehicle.
* NOTE Damage caused by incorrect cool‐
ant
Only add coolant that has been pre‐
#
mixed with the required antifreeze pro‐
tection.
Information on coolant is available at the fol‐
lowing locations:
in the Mercedes-Benz Specification for
R
Operating Fluids 310.1
at http://bevo.mercedes-benz.com
-
in the Mercedes-Benz BeVo app
-
at a qualified specialist workshop
R
* NOTE Overheating at high outside tem‐
peratures
If an inappropriate coolant is used, the engine
cooling system is not sufficiently protected
against overheating and corrosion at high out‐
side temperatures.
Always use coolant approved by
#
Mercedes-Benz.
Observe the instructions in the
#
Mercedes-Benz Specifications for Oper‐
ating Fluids 310.1.
* NOTE Paintwork damage due to coolant
Do not spill coolant on painted surfaces.
#
Have the coolant regularly replaced at a qualified
specialist workshop.
The percentage of corrosion inhibitor/antifreeze
in the engine cooling system
at least 50% (antifreeze protection up to
R
about -37 °C)
maximum 55% (antifreeze protection up to
R
-45 °C)
Windscreen washer fluid
Notes on windscreen washer fluid
Observe the notes on operating fluids
( page 335).
→
& WARNING ‑ Risk of fire and injury due to
windscreen washer concentrate
Windscreen washer concentrate is highly
flammable. It could ignite if it comes into con‐
tact with hot engine component parts or the
exhaust system.
Make sure that no windscreen washer
#
concentrate spills out next to the filler
opening.
* NOTE Damage to the exterior lighting
due to unsuitable windscreen washer
fluid
Unsuitable windscreen washer fluids may
damage the plastic surface of the exterior
lighting.
Only use windscreen washer fluids
#
which are also suitable for use on plas‐