Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 316

314
Wheels and tyres
Max. front axle load 2000 kg
Tyres/disc wheel
225/75R16C 121/120R
225/75R16C 121/120R
Rear axle tyre pressures on vehicles with rear-wheel drive and Super Single tyres
Max. rear axle load 3200 kg
Tyres/disc wheel
225/75R16C 121/120R
225/75R16C 121/120R
285/65R16C 131/129R
285/65R16C 131/129R
Max. rear axle load 3500 kg
Tyres/disc wheel
225/75R16C 121/120R
225/75R16C 121/120R
285/65R16C 131/129R
285/65R16C 131/129R
2)
Valid to use for a short time as a spare wheel
on the rear axle for a maximum distance of
100 km and a maximum speed of 55 km/h.
Be sure to also observe the following further rela‐
ted subjects:
Notes on tyre pressure (
R
Tyre pressure monitor
Function of tyre pressure monitor on Single
tyres
The system checks the tyre pressure and the tyre
temperature of the tyres fitted to the vehicle by
means of a tyre pressure sensor.
New tyre pressure sensors, e.g. in winter tyres,
are automatically taught-in the first time they are
driven.
Vehicle load
Fully laden
Empty
Vehicle load
Fully laden
Empty
Fully laden
Empty
Vehicle load
Fully laden
Empty
Fully laden
Empty
page 303)
→
Max. front axle load
2000 kg
370 kPa (3.7 bar/54 psi)
300 kPa (3.0 bar/44 psi)
Max. rear axle load
up to 3200 kg
690 kPa (6.9 bar/100 psi)
-
460 kPa (4.6 bar/67 psi)
400 kPa (4.0 bar/58 psi)
Max. rear axle load
3500 kg
690 kPa (6.9 bar/100 psi)
-
520 kPa (5.2 bar/75 psi)
400 kPa (4.0 bar/58 psi)
The tyre pressure and the tyre temperature
appear in the multifunction display (
If there is a substantial loss of tyre pressure, a
warning is issued:
via display messages (
R
via the h warning lamp in the instrument
R
cluster
It is the driver's responsibility to set the tyre pres‐
sure to the recommended cold tyre pressure suit‐
able for the operating situation. Set the tyre pres‐
sure for cold tyres using a tyre pressure gauge.
Note that the correct tyre pressure for the cur‐
rent operating situation must first be taught-in to
the tyre pressure monitoring system.
In most cases, the tyre pressure monitoring sys‐
tem will automatically update the new reference
values after you have changed the tyre pressure.
2)
page 176).
→
page 361)
→