Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 65

Using the head restraint fore/aft adjustment,
adjust the head restraint in such a way that it is
as close to the back of the head as possible.
& WARNING Risk of injury or death due to
incorrect seat position
The seat belt does not offer the intended level
of protection if you have not moved the seat
backrest to an almost vertical position.
When braking or in the event of an accident,
you could slide underneath the seat belt and
sustain abdominal or neck injuries, for exam‐
ple.
Adjust the seat properly before begin‐
#
ning your journey.
Always ensure that the seat backrest is
#
in an almost vertical position and that
the shoulder section of your seat belt is
routed across the centre of your shoul‐
der.
* NOTE Damage to the seats when moving
the seats back
The seats may be damaged by objects when
moving the seats back.
When moving the seats back, make sure
#
that there are no objects in the footwell,
under or behind the seats.
Sample image of comfort suspension seat
1
Seat cushion length
2
Seat backrest inclination
3
Seat height
4
Seat cushion inclination
5
Seat fore-and-aft adjustment
6
Seat suspension
7
Vibration limiting
%
Depending on the seat model, individual
adjustment options may be omitted.
To adjust the seat cushion length: raise
#
lever 1 and slide the front part of the seat
cushion forwards or backwards.
To set the seat backrest inclination: rotate
#
handwheel 2 forwards and backwards until
the required position has been reached.
To set the seat height: pull or push lever
#
until the required position has been reached.
To set the seat cushion inclination: rotate
#
handwheel 4 forwards and backwards until
the required position has been reached.
To set the seat fore-and-aft adjustment:
#
raise lever 5 and slide the seat into the
required position.
Ensure that the seat is engaged.
#
To set the seat suspension: take the weight
#
off the seat.
On handwheel 6, set the body weight (40 kg
#
to 120 kg) so that the seat suspension works
optimally. If you set a higher weight, the seat
suspension will become firmer. The seat will
then not vibrate as much. If the seat vibrates
often and significantly, you can engage it in
the lower area.
To engage vibration limiting: turn lever
#
upwards.
The next time the seat vibrates, it will engage.
To release vibration limiting: turn lever
#
to the right.
The seat can vibrate.
Adjusting the front seat electrically
& WARNING Risk of becoming trapped if
the seats are adjusted by children
Children could become trapped if they adjust
the seats, particularly when unattended.
When leaving the vehicle, always take
#
the key with you and lock the vehicle.
Never leave children unattended in the
#
vehicle.
The seats can be adjusted while the ignition is
off.
63
Seats and stowage
3
7
7