Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 168

Table of Contents

Advertisement

166
Driving and parking
Vehicles with Blind Spot Assist and Parking
Assist PARKTRONIC: drivers can also be warned
of any crossing traffic when reversing out of a
parking space. If a critical situation is detected, a
warning symbol appears on the camera image of
the multimedia system. If the driver does not
respond to the warning, the vehicle's brakes can
be applied automatically. In this case, a warning
tone sounds.
The Rear Cross Traffic Alert function is active
under the following conditions:
Blind Spot Assist is activated
R
reverse gear is engaged or the vehicle is
R
reversing at walking pace
If the manoeuvring assistance function is acti‐
R
vated in the multimedia system.
The Rear Cross Traffic Alert function is unavaila‐
ble when driving with a trailer.
Lane Keeping Assist and Active Lane Keeping
Assist
Functions of Lane Keeping Assist
Lane Keeping Assist monitors the area in front of
your vehicle with multifunction camera 1. It
serves to protect you against unintentionally leav‐
ing your lane. You may also be warned by a
vibrating message from the steering wheel and by
the status symbol flashing in the instrument dis‐
play.
The warning is issued when the following condi‐
tions are met at the same time:
Lane Keeping Assist detects lane markings.
R
A front wheel passes over the lane markings.
R
You can activate and deactivate the Lane Keeping
Assist warning.
If you fail to adapt your driving style, Lane Keep‐
ing Assist can neither reduce the risk of accident
nor override the laws of physics. It cannot take
into account road, weather or traffic conditions.
Lane Keeping Assist is only an aid and is not
intended to keep the vehicle in the lane without
the driver's cooperation. You are responsible for
the distance to the vehicle in front, for vehicle
speed, braking in good time and for staying in
your lane.
System limitations
The system may be impaired or may not function
in the following situations:
There is poor visibility, e.g. due to insufficient
R
illumination of the road, highly variable shade
conditions, or due to rain, snow, fog or heavy
spray.
Dazzle from oncoming traffic, direct sunlight
R
or reflections.
There is dirt on the windscreen in the vicinity
R
of the multifunction camera or the camera is
misted up, damaged or obscured.
No or several, unclear lane markings are pres‐
R
ent for one lane, e.g. in a construction area.
The lane markings are worn, dark or covered.
R
The distance to the vehicle in front is too
R
small and the lane markings are thus not
detected.
The lane markings change quickly, e.g. lanes
R
branch off, cross one another or merge.
The carriageway is very narrow and winding.
R
Functions of Active Lane Keeping Assist

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents