Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 68

66
Seats and stowage
Adjust the seat into the desired position.
#
Press memory button M together with one of
#
the preset position buttons 1, 2 or 3.
An acoustic signal sounds. The settings are
stored.
To call up: press and hold the relevant preset
#
position button 1, 2 or 3 until the front seat is
in the stored position.
Rotating the front seats
& WARNING Risk of injury or death if the
driver's seat and co-driver's seat are not
engaged
If the driver's‑ and co-driver's seats are not
engaged in the direction of travel during the
trip, the restraint systems cannot offer pro‐
tection as intended.
Engage the driver's‑ and co-driver's seat
#
in the direction of travel before the
engine is started.
You can rotate the driver's and front passenger
seat 50° and 180°. The seats engage both in and
opposite to the direction of travel as well as at
50° to the exit.
Ensure that the parking brake is applied and
#
the brake lever is folded downwards as far as
it will go ( page 141).
→
Adjust the steering wheel in such a way that
#
there is sufficient free space to rotate and
adjust the driver's seat (
Slide the front passenger seat forward before
#
rotating it ( page 60).
→
To rotate the seat: push lever
#
the vehicle centre and rotate the seat slightly
inwards.
The rotation device is unlocked.
Release lever 1 again.
#
Rotate the seat by around 50 ° outwards or
#
inwards into the required position.
page 72).
→
1 towards