Partition Sliding Door - Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual

Opening the rear left door
Make sure that the rear right door is open
#
and engaged.
Pull release handle 1
#
arrow.
Swing the rear door to the side until it
#
engages.
Opening the rear doors fully
Open the relevant rear door out past the first
#
detent (90°).
Open the rear door fully.
#
The rear door will stay in the stop position.
Closing the rear doors from outside
Close the rear left door firmly from outside.
#
Close the rear right door firmly from outside.
#
Opening/closing the rear doors from the
inside
in the direction of the
The % symbol indicates that the rear door is
unlocked.
To unlock: slide latch
#
The % symbol is visible.
To open: pull opening lever
#
the rear door.
Swing the rear door to the side until it
#
engages.
To close: make sure that the rear left door is
#
closed.
Pull the rear right door firmly to by the door
#
handle.
To lock: slide latch
#
The & symbol is visible.

Partition sliding door

Opening and closing the partition sliding door
from the driver's compartment
& WARNING Risk of becoming trapped due
to non-engaged partition sliding door
If the open partition sliding door is not
engaged, it can move on its own while the
vehicle is in motion.
This can cause you or other people to
become trapped.
Before driving, always close the parti‐
#
tion sliding door and ensure that it is
engaged.
To open: turn the key to the left 3.
#
The sliding door is unlocked.
Slide the sliding door to the right
#
it will go.
Opening and closing
2 to the left
1 up and open
2 to the right
2 as far as
51