Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 293

Remove breather hose
#
bracket from the connection on the degassing
cover.
Unscrew bolts 2 of bracket
#
bracket out upwards.
Slide the starter battery from its anchorage
#
across the direction of travel.
Fold the bars of the starter battery upwards
#
and lift the starter battery out of the battery
compartment.
Vehicles with front wheel drive: fitting the
starter battery
When reconnecting the starter battery,
#
observe the safety measures and protection
notes ( page 286).
→
Insert the starter battery into the battery
#
compartment.
%
Take care that no wires are trapped.
Fold down the bars of the starter battery.
#
Slide the starter battery into its anchorage
#
across the direction of travel.
1 with the connector
3 and pull the
Breakdown assistance
Insert bracket 3.
#
Tighten bolts 2 on bracket
#
the battery in place.
Attach breather hose
#
bracket to the connection of the ventilation
cover.
Place the prefuse box on the battery.
#
Connect positive pole
#
Place the wires on the support bolt.
#
291
3 which holds
1 with the connector
A and close cover 7.