Notes On Assembling The Number Plate On The Front Licence Plate Holder; Declarations Of Conformity And Notes On Driving In Different Countries - Mercedes-Benz EQB 2022 Operator's Manual

High-voltage components that can become very
hot are marked with an additional warning sticker:
Example
Vehicles with an electric motor generate signifi-
cantly less driving noise than vehicles with inter-
nal-combustion engines.
Therefore the vehicle may not be heard by other
road users due to the significantly reduced sound
produced.
For this reason the vehicle is equipped with a
sound generator, which serves as an acoustic
vehicle alerting system (AVAS). This protective
equipment is prescribed by law.
The outside sound produced by the sound genera-
tor (AVAS) can be heard in the passenger com-
partment at low speeds and does not represent a
malfunction.
Notes on assembling the number plate on the
front licence plate holder
* NOTE Malfunctions and system failures
due to incorrect assembly of the licence
plate on the front licence plate holder
If the licence plate is incorrectly assembled on
the front licence plate holder, sensors, cam-
General notes
eras or driving and safety systems may mal-
function or fail.
Observe the following points when assembling
the licence plate on the front licence plate
holder:
Assemble the licence plate directly on
#
the licence plate holder without advertis-
ing media or other holders.
Assemble the licence plate so that it
#
does not protrude above or to the side of
the licence plate adapter.
Declarations of conformity and notes on driving
in different countries
Electromagnetic compatibility
The electromagnetic compatibility of the vehicle
components has been checked and certified
according to the currently valid version of Regula-
tion UN-R 10.
27