Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 96

94
Light and vision
Insert new washer blade
#
wiper arm 3.
When doing so, take into account the different
lengths of the wiper blades:
Driver's side: long wiper blade
R
Front passenger side: short wiper blade
R
Slide catch 2 downwards until it engages.
#
Fold wiper arm 3 back onto the windscreen.
#
Replacing the windscreen wiper blades (WET
WIPER SYSTEM)
& WARNING Risk of becoming trapped if
the windscreen wipers are switched on
while wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
Always switch off the windscreen wip‐
#
ers and ignition before changing the
wiper blades.
& WARNING Risk of injury from using the
windscreen wipers while the engine bon‐
net is open
When the engine bonnet is open, and the
windscreen wipers are set in motion, you can
be trapped by the wiper linkage.
Always switch off the windscreen wip‐
#
ers and ignition before opening the
engine bonnet.
%
If the wiper blades are worn out, they will not
wipe the windscreen properly. Replace the
wiper blades twice a year, preferably in
spring and autumn.
1 in the holder on
Fold wiper arm 3 away from the windscreen.
#
Hold wiper arm 3
#
away from wiper arm
the arrow as far as it will go.
Slide catch 2 upwards in the direction of the
#
arrow until it engages.
Remove wiper blade
#
the direction of arrow 4.
Carefully remove hose
#
blade.
Attach hose 5 to the new wiper blade.
#
Insert new washer blade
#
wiper arm 3.
When doing so, take into account the different
lengths of the wiper blades:
Driver's side: long wiper blade
R
Front passenger side: short wiper blade
R
Slide catch 2 downwards until it engages.
#
Fold back the wiper blade on the wiper arm.
#
Fold wiper arm 3 back onto the windscreen.
#
and turn the wiper blade
3
in the direction of
1 from the wiper arm in
5 from the wiper
1 in the holder on