Display Messages And Warning And Indicator Lamps; Display Messages - Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual

Table of Contents

Advertisement

Display messages

Introduction
Information about display messages
The display messages appear on the multifunc‐
tion display.
The display messages with graphic displays can
be displayed in simplified format in the operating
manual and may deviate from the display on the
multifunction display. The multifunction display
shows high-priority display messages in red. In
addition, a warning tone sounds for specific dis‐
play messages.
Act in accordance with the display messages and
comply with the additional instructions in this
operating manual.
In addition, symbols are shown for some display
messages:
¤ Further information
R
O Hiding display messages
R
With left-hand Touch Control, you can select
between the symbols by swiping to the left or
right. Pressing ¤ displays further information
Safety systems
Display messages
6
Left windowbag malfunc-
tion Consult work-
shop
(example)

Display messages and warning and indicator lamps

Possible causes/consequences and
* The windowbag in question is malfunctioning .
& WARNING Risk of injury or fatal injury due to a malfunction
in the window airbag
The window airbag might be triggered unintentionally or might
not be triggered at all in the event of an accident with high
deceleration.
Have the window airbag checked and repaired immediately
#
at a qualified specialist workshop.
Visit a qualified specialist workshop immediately.
#
on the multifunction display. Pressing O hides
the display message.
You can hide low-priority display messages by
pressing the button ¤ or with left-hand Touch
Control. The display messages are saved in the
message memory.
Remove the cause of a display message as
quickly as possible.
You cannot hide high-priority display messages.
The multifunction display shows these display
messages permanently until the cause of the dis‐
play message has been eliminated.
Calling up saved display messages
On-board computer:
Service
1 message
,
.
If there are no display messages,
appears on the multifunction display.
Browse through the display messages by
#
swiping upwards or downwards on left-hand
Touch Control on the steering wheel.
Exiting the message memory: press the
#
button %.
Solutions
M
345
No messages

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents