Vehicle Tool Kit - Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual

Opening the fuse box in the co-driver footwell
Unlocking and removing the stowage com‐
#
partment cover in the co-driver footwell
( page 299).
→
Remove insert 1 with the vehicle tool kit.
#

Vehicle tool kit

Information on the vehicle tool kit
The vehicle tool kit is located in the stowage com‐
partment in the footwell on the co-driver side
( page 299).
→
The vehicle tool kit contains:
a towing eye
R
a screwdriver with Torx, Phillips and slotted
R
bits
the vehicle tool kit can also contain the fol‐
R
lowing, for example:
an open-end spanner
-
a wheel spanner
-
Breakdown assistance
Unlocking and removing the stowage com‐
partment cover
Remove the rubber mat from the co-driver's
#
footwell.
To unlock: turn the quick-release fastener
#
anti-clockwise to position 1.
Slightly raise and pull out the cover.
#
Inserting and locking the cover
Slide in the cover and press it downwards.
#
Press down the quick-release fastener
#
until it engages.
To lock: turn the quick-release fastener
#
clockwise to position 2.
Removing the vehicle tool kit
Remove the vehicle tool kit from the stowage
#
compartment 1.
299
1
1
1