Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 90

88
Light and vision
If the new bulb also does not light up, consult a
qualified specialist workshop.
Replacing front light bulbs (vehicles with hal‐
ogen headlamps)
Overview of front bulb types
You can change the following bulbs.
Halogen headlamps
1
Main beam/daytime running lights:
H15 55 W/15 W
2
Dipped beam/perimeter light: H7 55 W/
W 5 W
3
Indicators: PY 21 W
Changing the halogen headlamp
Requirements:
Dipped beam: light bulb type H7 55 W
R
High beam/daytime running lights: light
R
bulb type H15 55 W/15 W
Perimeter lights: light bulb type W 5 W
R
Indicators: bulb type PY 21 W
R
1
High beam/daytime running lights housing
cover
2
Dipped beam/perimeter lights housing cover
3
Indicator socket
Switch off the lighting system.
#
High beam/daytime running lights: pull
#
back the housing cover 1.
Turn the socket anti-clockwise and pull it out.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
#
the base of the bulb rests fully against the
base of the socket.
Insert the socket and turn it clockwise.
#
Attach the housing cover 1.
#
Dipped beam/perimeter lights: pull back
#
the housing cover 2.
Pull out the socket towards the rear.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
#
the base of the bulb rests fully against the
base of the socket.
Align and insert the socket.
#
Attach the housing cover 2.
#
Indicator: switch off the lighting system.
#
Turn the socket 3
#
remove it.
Gently turn the bulb anti-clockwise and take it
#
out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise.
Insert the socket 3
#
anti-clockwise and
and turn it clockwise.