Windscreen Wipers - Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual

92
Light and vision
Replacing bulbs in additional lamps
Side marker lamps
Requirements:
Side marker lamps: light bulb type LED
R
Switch off the lighting system.
#
Position a screwdriver, for example, at the
#
side and carefully lever off side marker lamp
1 in the direction of the arrow.
Remove plug 2 from side marker lamp
#
the direction of the arrow.
Connect the new side marker lamp with the
#
plug.
Position the side marker lamp on the left and
#
press in.
The side marker lamp engages audibly.
Replacing interior light bulbs
Bulbs for rear interior lamps
Requirements:
%
For the standard bulb failure indicator func‐
tion to work correctly, only lights bulbs must
be used that are the same type and power as
those installed during production.
Switch off the interior lighting.
#
Press in the catch spring of lens
#
suitable object e.g. a screwdriver, and then
lever off the lens with the lamp housing.
To pull back lens from the lamp housing:
#
press the lugs of the lens
Remove light bulb
#
Insert the new light bulb.
#
Insert the lens in the lamp housing until it
#
1 in
engages.
Place the lens with the lamp housing in posi‐
#
tion until it engages.

Windscreen wipers

Switching the windscreen wipers on/off
1
î Single wipe/wiping with washer fluid
1 g Windscreen wipers off
2 Ä Intermittent wiping, normal
1 with a
2 inwards.
3 from the lamp housing.