Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 58

56
Opening and closing
& WARNING Risk of becoming trapped
despite there being reversing protection
on the side window
The reversing function does not react:
to soft, light and thin objects, e.g. small
R
fingers
over the last 4 mm of the closing path
R
during resetting
R
when closing the side window again man‐
R
ually immediately after automatic revers‐
ing
This means that the reversing function cannot
prevent someone from becoming trapped in
these situations.
When closing, make sure that no body
#
parts are in the closing area.
If someone becomes trapped, press the
#
W button to open the side window
again.
Ventilating the vehicle before starting a jour‐
ney (convenience opening)
& WARNING Risk of entrapment when
opening a side window
When opening a side window, parts of the
body could be drawn in or become trapped
between the side window and window frame.
When opening, make sure that nobody
#
is touching the side window.
Release the button immediately if some‐
#
body becomes trapped.
You can ventilate the vehicle before you start
driving.
To do this, the key is used to carry out the follow‐
ing functions simultaneously:
unlock the vehicle
R
open the side windows
R
Problems with the side windows
Problem
A side window cannot be
closed and the cause is
not obvious.
Possible causes/consequences and
Check to see if there are any objects in the window guide.
#
The "convenience opening" function can only be
operated using the key. The key must be in close
proximity to the driver's or co-driver's door.
Press and hold the % button on the key.
#
The following functions are performed:
the vehicle is unlocked
R
the side windows are opened
R
To interrupt convenience opening: release
#
the % button.
Closing side windows from the outside (con‐
venience closing)
& WARNING Risk of entrapment caused by
inadvertent convenience closing
When the convenience closing feature is
operating, parts of the body could become
trapped in the closing area of the side win‐
dows.
Observe the complete closing proce‐
#
dure when using convenience closing.
When closing, make sure that no body
#
parts are in the closing area.
Press and hold the & button on the key.
#
The following functions are performed:
the vehicle is locked
R
the side windows are closed
R
To interrupt convenience closing: release
#
the & button.
Adjusting the side windows
The side windows must be readjusted after a mal‐
function or a voltage supply interruption.
Switch on the ignition (
#
Push both buttons on the power window and
#
hold for approximately one second after the
side window has closed.
Solutions
M
page 110).
→