Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 240

238
MBUX multimedia system
#
Select .
The call is made.
Accepting a call
#
Select Accept.
Rejecting a call
#
Select Reject.
Ending a call
#
Select .
Activating functions during a call
The following functions are available during a call:
End call
Microphone off
_
Numerical keypad
tones)
Add call
W
Transfer to phone
hands-free mode is transferred over to
the telephone)
Select a function.
#
Putting an active call on hold
Tap on the contact or the call.
#
The call will be put on hold.
%
The call on hold can be ended any time or re-
activated by tapping again.
Conducting calls with several participants
Requirements:
There is an active call (
R
Another call is being made.
R
Switching between calls
Select the contact.
#
The selected call is active. The other call is on
hold.
Activating a call on hold
Select the contact of the call on hold.
#
(show to send DTMF
(an active call in
page 237).
→
Conducting a conference call
#
Select Create conferen.
The new participant is included in the confer‐
ence call.
Ending an active call
#
Select End call.
%
On some mobile phones, the call on hold is
activated as soon as the active call is ended.
Accepting/rejecting a waiting call
Requirements:
There is an active call (
R
If you receive a call while already in a call, a mes‐
sage is displayed.
Depending on the mobile phone and network
operator you will hear a call-waiting sound.
In addition, in two phone mode you will hear an
acoustic signal when the call goes through to the
other (not yet active) mobile phone.
#
Select Accept.
The incoming call is active.
If only one mobile phone is connected with
the multimedia system, the previous call will
be put on hold.
If during a call you accept a call with the
other mobile phone when in two phone mode
then the existing call is ended.
#
Select Reject.
%
This function and behaviour depends on your
mobile phone network provider and the
mobile phone (see the manufacturer's oper‐
ating instructions).
Contacts
Information about the contacts menu
The contacts menu contains all contacts from
existing data sources, e.g. mobile phone or mem‐
ory card.
Depending on the data source, you have the fol‐
lowing number of contacts:
Permanently saved contacts: 3,000 entries
R
call.
page 237).
→