Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 210

208
MBUX multimedia system
Data import and data export
Data import/export function
The following functions are possible:
transfer data from one system or vehicle to
R
another system or vehicle.
make a backup copy of your personal data
R
and load it again.
protect your personal data against unwanted
R
export with PIN protection.
%
Please note that the NTFS file system is not
supported. The FAT32 file system is recom‐
mended.
Importing/exporting data
* NOTE Loss of data due to premature
removal
Do not remove the data storage medium
#
when data is being exported.
Mercedes-Benz is not liable for any loss of
data.
Requirements:
The vehicle is stationary.
R
The ignition is switched on.
R
A USB device is connected .
R
Multimedia system:
© System
, .
Select Import data or
#
Importing
Select a data storage medium.
#
A prompt appears asking whether you really
wish to overwrite the current data. If data
originates from another vehicle, this is recog‐
nised during data reading.
The multimedia system is restarted once the
data has been imported.
% Current vehicle settings can be edited after
the import.
Exporting
If PIN protection is activated, your PIN is reques‐
ted.
Enter the four-digit PIN.
#
Select a data storage medium.
#
The data is exported. The data export may
take several minutes.
System backup
.
Export data.
%
After successful export, the data is saved in
the "MyMercedesBackup" directory which
can be found on the storage medium.
Activating/deactivating PIN protection
Multimedia system:
© Settings
, .
tection
Setting the PIN
Select Set PIN.
#
Enter a four-digit PIN.
#
Enter the four-digit PIN again.
#
If both PINs match, PIN protection is active.
Changing the PIN
Select Change settings.
#
Enter the current PIN.
#
Select Change PIN.
#
Set a new PIN.
#
Activating PIN protection for data export
Select Change settings.
#
Confirm with the PIN.
Select Protect data
#
Activate or deactivate the function.
Unblocking the PIN
Consult a Mercedes-Benz service centre and
#
have the PIN protection reset.
Software update
Information on software updates
A software update consists of three steps:
Downloading or copying of the data required
R
for installation
Installation of the update
R
Activation of the update by restarting the sys‐
R
tem
The multimedia system provides a message when
an update is available.
Depending on the source, you can perform vari‐
ous updates:
System PIN pro-
. .
export.