Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 369

Display messages
Without changing gear,
consult workshop
Only select Park (P)
when vehicle is station-
ary
N permanently active
Risk of vehicle rolling
Risk of vehicle rolling
Driver's door open and
transmission not in P
To shift out of P or N,
depress brake and start
engine
Apply brake to deselect
Park (P) position
Vehicle positioning has
been activated. Details:
see manual or associ-
ated mobile app.
Step not extended See
Owner's Manualor step
not extended malfunc-
tion
Step not retracted See
Owner's Manualor step
not retracted malfunction
Display messages and warning and indicator lamps
Possible causes/consequences and
* The transmission is malfunctioning. The transmission position can
no longer be changed.
If the transmission is in position h, visit a qualified specialist
#
workshop, without changing the transmission position.
For all other transmission positions, park the vehicle in a safe
#
location.
Consult a qualified specialist workshop.
#
* The transmission can only be brought into position j if the vehicle
is at a standstill.
* While the vehicle is rolling or driving, the transmission was shifted
to position i.
To stop, press the brake pedal and, when the vehicle is at a
#
standstill, shift the transmission to position j.
To continue driving, shift the transmission to position h or k.
#
* The driver's door is not completely closed and the transmission is in
position k, i or h.
When parking the vehicle, shift the transmission to position j.
#
* Vehicles with front-wheel drive: You have tried to shift to a differ‐
ent transmission position from position j or i.
Press the brake pedal.
#
Start the engine.
#
* You have tried to shift to a different transmission position from posi‐
tion j.
Press the brake pedal.
#
* The vehicle features activated services from Mercedes PRO.
Positioning the vehicle may be possible as part of Mercedes PRO
connect.
Check the status of the activated services at http://
#
mercedes.pro.
Ask the vehicle owner for the details.
#
* The electrical step is not, or only partially, extended.
Ensure there is sufficient clearance for the electrical step.
#
Open or close the sliding door again.
#
If the electrical step does not completely extend again, slide it in
#
manually (emergency release) (
Inform passengers that the step is missing before they exit the
#
vehicle.
* The electrical step is not, or only partially, retracted.
Ensure there is sufficient clearance for the electrical step.
#
Open or close the sliding door again.
#
If the electrical step does not completely retract again, slide it in
#
manually (emergency release) (
Solutions
M
page 53).
→
page 53).
→
367