Mercedes-Benz Sprinter 907 2018 Operating Instructions Manual page 363

Display messages
Ø
Top up AdBlue Perform-
ance reduced after eng.
restart: 12 mph
Ø
Top up AdBlue Power
reduced: 12 mph
¯
AdBlue system fault See
Owner's Manual
¯
AdBlue system fault Per-
formance reduced
¯
AdBlue system fault Per-
formance reduced after
eng. restart: XXX mph
¯
AdBlue system fault Per-
formance reduced: 12
mph
Tyres
Display messages
Tyre pressure monitor
inoperative No wheel
sensors
h
Wheel sensor(s) missing
Display messages and warning and indicator lamps
Possible causes/consequences and
* The next time the engine is started, the low AdBlue
restrict the speed to a maximum of 20 km/h.
Top up at least 8 l of AdBlue
#
* The level of AdBlue
®
restricted to a maximum of 20 km/h.
Top up at least 8 l of AdBlue
#
Switch on the ignition.
#
* The AdBlue
®
system is malfunctioning.
Visit a qualified specialist workshop immediately.
#
* The AdBlue ®
system is malfunctioning. The power is restricted to
75 % of the engine torque.
Visit a qualified specialist workshop immediately.
#
* The AdBlue
®
system is malfunctioning. The next time the engine is
started, the system malfunction will restrict the speed to a maxi‐
mum of 20 km/h.
Visit a qualified specialist workshop immediately.
#
* The AdBlue ®
system is malfunctioning. The system malfunction will
restrict the speed to a maximum of 20 km/h.
Inform a qualified specialist workshop immediately.
#
Possible causes/consequences and
* The installed wheels do not have suitable tyre pressure sensors. The
tyre pressure monitor has been switched off.
Install wheels with suitable tyre pressure sensors.
#
* The tyre pressure sensor signal is missing from one or more tyre(s).
No pressure value is displayed for the tyre in question.
Have the faulty tyre pressure sensor replaced in a qualified spe‐
#
cialist workshop.
Solutions
M
®
immediately (
consumption means that the speed will be
®
immediately (
Solutions
M
361
®
level will
page 136).
→
page 136).
→