6.3
Setpoints
6.3.1
Overview
The inverter receives its main setpoint from the setpoint source. The main setpoint generally
specifies the motor speed.
Figure 6-16
You have the following options when selecting the source of the main setpoint:
● Inverter fieldbus interface
● Inverter analog input
● Electromechanical potentiometer
● Motorized potentiometer simulated in the inverter
● Fixed setpoints saved in the inverter
You have the same selection options when selecting the source of the supplementary
setpoint.
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 06/2016, FW V4.7.6, A5E31298649B AG
Setpoint sources for the inverter
Advanced commissioning
6.3 Setpoints
165