Table A- 15
Category C2 - First Environment - Professional Use
Article number
6SL3517-1BE11-*A*0
6SL3517-1BE12-*A*0
6SL3517-1BE13-*A*0
6SL3517-1BE14-*A*0
6SL3517-1BE16-*A*0
6SL3517-1BE17-*A*0
6SL351701BE21-*A*0
EMC Emissions
Note
Install all drives in accordance with the manufacturer's guidelines and in accordance with
good EMC practices.
Use screened cable type CY. The maximum cable length is 15 m, at a switching frequency
of 4 kHz
Table A- 16
EMC Phenomenon
Conducted emissions
(disturbance voltage)
Radiated emissions
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 06/2016, FW V4.7.6, A5E31298649B AG
Compliance Table
Remark
All inverters with integrated Class A filters.
The inverter meets the requirements for category C2 for conducted emis-
sions.
In a domestic environment this product may cause radio interference in
which case supplementary mitigation measures may be required.
Conducted disturbance voltage and radiated emissions
Converter type
Remark
All converters with integrated class A filters.
Article number:
6SL3517-1BE**-*A**
Converter frame sizes A and B with integrated class A
filter.
Article number:
6SL3517-1BE11-*A*0
6SL3517-1BE12-*A*0
6SL3517-1BE13-*A*0
6SL3517-1BE14-*A*0
6SL3517-1BE16-*A*0
6SL3517-1BE17-*A*0
6SL3517-1BE21-*A*0
In a domestic environment this product may cause
radio interference in which case supplementary miti-
gation measures may be required.
A.9 Electromagnetic Compatibility
Level acc. to
IEC 61800-3
Category C2
First Environment -
Professional Use
Category C2
First Environment -
Professional Use
Appendix
333