Changes In This Manual - Siemens SINAMICS G110M Operating Instructions Manual

Changes in this manual

Important changes with respect to the Manual, Edition 06/2016
An overview of all the new and changed functions in the V4.7.6 firmware can be found in
Section
Revised descriptions
● Description:
– Identifying the components of the system
– SINAMICS G110M converter
– Compatible motors
–
● System installation:
– Installation procedures
– Installing the 24 V power supply
–
● Electrical installation:
– Dimensioning the protective conductor
● Advanced commissioning:
– Acceptance test
– Saving settings to the memory card
– Transferring the settings from the memory card
– Manually transferring the settings from the memory card
– Safely remove the memory card
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 06/2016, FW V4.7.6, A5E31298649B AG
New and extended functions (Page 313)
Identifying the components of the system (Page 25)
SINAMICS G110M converter (Page 26)
SINAMICS G110M converter (Page 26)
System Installation (Page 41)
Installing the 24V power supply (Page 54)
Protective conductor (Page 63)
Acceptance - completion of commissioning (Page 252)
Saving settings to the memory card (Page 260)
Transferring the settings from the memory card (Page 262)
Manually transferring the settings from the memory card (Page 263)l
Safely remove the memory card (Page 265)
5