Motorized Potentiometer As Setpoint Source; Advanced Commissioning - Siemens SINAMICS G110M Operating Instructions Manual

Advanced commissioning

6.3 Setpoints
Table 6- 19
Parameter
p1070 = 755[2]
p1075 = 755[2]
6.3.5

Motorized potentiometer as setpoint source

The "Motorized potentiometer" function emulates an electromechanical potentiometer. The
output value of the motorized potentiometer can be set with the "higher" and "lower" control
signals.
Interconnecting the motorized potentiometer (MOP) with the setpoint source
Figure 6-20
Figure 6-21
168
Setting the potentiometer as setpoint source
Remark
Main setpoint
Interconnect the main setpoint with the internal analog input 2
Additional setpoint
Interconnect the additional setpoint with the internal analog input 2.
Motorized potentiometer as setpoint source
Function chart of the motorized potentiometer
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 06/2016, FW V4.7.6, A5E31298649B AG