Siemens SINAMICS G110M Operating Instructions Manual page 19

Danger as a result of unsafe operating states resulting from software manipulation
Software manipulation (e.g. by viruses, Trojan horses, malware, worms) can cause unsafe
operating states to develop in your installation which can result in death, severe injuries
and/or material damage.
• Keep the software up to date.
• Incorporate the automation and drive components into a holistic, state-of-the-art
• Make sure that you include all installed products into the holistic industrial security
Danger to life due to software manipulation when using exchangeable storage media
Storing files onto exchangeable storage media amounts to an increased risk of infection,
e.g. with viruses and malware. As a result of incorrect parameterization, machines can
malfunction, which in turn can lead to injuries or death.
• Protect files stored on exchangeable storage media from malicious software by taking
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 06/2016, FW V4.7.6, A5E31298649B AG
WARNING
You will find relevant information and newsletters at this address
(http://support.automation.siemens.com).
industrial security concept for the installation or machine.
You will find further information at this address
(http://www.siemens.com/industrialsecurity).
concept.
WARNING
suitable protection measures, e.g. virus scanners.
Fundamental safety instructions
1.4 Industrial security
19