Switching Units With Starter; Advanced Commissioning - Siemens SINAMICS G110M Operating Instructions Manual

6.7.1.4

Switching units with STARTER

Precondition
The inverter must be in the offline mode in order to change over the units.
STARTER shows whether you change settings online in the inverter or change offline in the
PC (
You switch over the mode using the adjacent
buttons in the menu bar.
Procedure
To change over the units with STARTER, proceed as follows:
1. Select the configuration
2. Go to the "Units" tab in the configuration screen form to change over the units
3. Changing over the system of units
4. Select process variables of the technology controller
5. Adapting to the line supply
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 06/2016, FW V4.7.6, A5E31298649B AG
/ ).

Advanced commissioning

6.7 Application-specific functions
209