6.14
Setpoints
6.14.1
Overview
The inverter receives its main setpoint from the setpoint source. The main setpoint generally
specifies the motor speed.
Figure 6-33
You have the following options when selecting the source of the main setpoint:
● Inverter fieldbus interface
● Inverter analog input
● Electromechanical potentiometer
● Motorized potentiometer simulated in the inverter
● Fixed setpoints saved in the inverter
You have the same selection options when selecting the source of the supplementary
setpoint.
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 09/2017, FW V4.7.9, A5E31298649B AH
Setpoint sources for the inverter
Advanced commissioning
6.14 Setpoints
213