Siemens SINAMICS G110M Operating Instructions Manual page 28

Description
3.2 SINAMICS G110M converter
Communications
PROFINET
PROFINET
PROFINET
AS-i
AS-i
AS-i
AS-i
AS-i
AS-i
Every SINAMICS G110M is delivered with the following accessories:
All variants
● PTC connection cable - this is the extension cable used to connect the PTC wires from
the motor to the connection on the CPI board.
● EM brake cable - this the extension cable used to connect the EM brake wires from the
motor to the mains connector when the EM brake wire is too short.
● Pre-wired motor terminal cables ready for connecting to the motor terminals on the motor.
● Earthing cable for earthing the motor to the terminal housing (except FS80/90).
● PROFIBUS Communications cable for connecting the CPI board to the communications
connection on the Control Module.
SINAMICS G110M HanQ 4/2 variant
● Male and female HanQ connectors, one of which is pre-wired with pins crimped on the
other end ready for assembly.
● Blanking cap for users not wishing to utilize the power-through daisy chain.
Table 3- 3
Option
24 V Power supply
Internal braking resistor
(FSA)
Internal braking resistor
(FSB)
Glanded connector kit
28
Motor frame size
FS71
FS80/90
FS100/112
FS71
FS80/90
FS100/112
FS71
FS80/90
FS100/112
SINAMICS G110M Options
Description
Internal 24 V DC power supply for the CU240M
Continuous braking power 7.5 W, peak power 75
W (load period t
sistance 350 Ω
Continuous braking power 20 W, peak power 200
W (load period t
sistance 175 Ω
Comprises the following connectors:
M20 screw gland - used for 24 V power sup-
•
ply daisy chain
M25 plastic gland - used for the 3-phase
•
mains daisy chain
M12 plastic gland - used for the EM-brake
•
cable entry.
Mains / 24 V DC Article number
connections
HanQ 4/2 / 7/8" 6SL3544-0TB02-1FA0
HanQ 4/2 / 7/8" 6SL3544-0PB02-1FA0
HanQ 4/2 / 7/8" 6SL3544-0QB02-1FA0
Cable glands 6SL3544-0LB02-1MA0
Cable glands 6SL3544-0MB02-1MA0
Cable glands 6SL3544-0NB02-1MA0
HanQ 4/2 / 7/8" 6SL3544-0TB02-1MA0
HanQ 4/2 / 7/8" 6SL3544-0PB02-1MA0
HanQ 4/2 / 7/8" 6SL3544-0QB02-1MA0
=12s over a period t=240s) re-
a
=12s over a period t=240s) re-
a
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 06/2016, FW V4.7.6, A5E31298649B AG
Article number
6SL3555-0PV00-0AA0
6SL3501-0BE18-8AA0
6SL3501-0BE22-0AA0
6SL3566-2VA00-0GA0