Setpoints; Overview - Siemens SIMATIC ET 200pro Series Operating Instructions Manual
Low voltage converter for the distributed i/o system
Hide thumbs
Also See for SIMATIC ET 200pro Series:
- Operating instructions manual (545 pages) ,
- Quick manual (260 pages) ,
- Original instructions manual (256 pages)
Table of Contents
Advertisement
Advanced commissioning
7.8 Setpoints
7.8
Setpoints
7.8.1
Overview
The inverter receives its main setpoint from the setpoint source. The main setpoint generally
specifies the motor speed.
Figure 7-13
You have the following options when selecting the source of the main setpoint:
● Inverter fieldbus interface.
● Motorized potentiometer simulated in the inverter.
● Fixed setpoints saved in the inverter.
You have the same selection options when selecting the source of the supplementary
setpoint.
Under the following conditions, the inverter switches from the main setpoint to other
setpoints:
● When the technology controller is active and appropriately interconnected, its output
specifies the motor speed.
● When jogging is active.
● When controlling from an operator panel or the STARTER PC tool.
124
Setpoint sources for the inverter
Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257324B AE
SIMATIC ET 200pro FC-2 converter
Advertisement
Table of Contents
