Controller Settings - ABB IRC5 with FlexPendant Operating Manual

3 Navigating and handling FlexPendant

3.7.2.3 Controller settings

3.7.2.3 Controller settings
Date and time settings
Use the following procedure to configure date and time.
Step
1
2
3
4
5
6
Network settings
Use the following procedure to configure the network.
Step
1
2
3
4
5
Identity settings
Use the following procedure to configure the identity of the controller.
Step
1
2
3
4
Continues on next page
112
Action
On the ABB menu, tap Control Panel.
Tap Controller Settings.
The Date and Time settings window is displayed.
In the Settings section, select Network Time or Manual Time.
Select Network Time for configuring the robot controller for automatic time synchronization
using NTP protocol of a time server. The time server is identified by its IP address or DNS
name. Select Manual Time if you do not have a time server that is reachable from the
controller.
Select the required time zone from the Time Zone section.
In the Date and Time section, tap the + (Plus) or - (Minus) button and configure the date
and time.
Tap OK.
The selected settings are saved.
Note
The date and time are displayed according to the ISO standard. That is, date is
in the year-month-day format and time is in the hour:minute format (24-hour
format).
Action
On the ABB menu, tap Control Panel.
Tap Controller Settings.
Navigate to the bottom menu, tap Settings, and select Network.
The Control Panel - Controller Settings - Network window is displayed.
Configure the network settings according to your requirements.
Tap OK.
The selected settings are saved.
Action
On the ABB menu, tap Control Panel.
Tap Controller Settings.
Navigate to the bottom menu, tap Settings, and select Identity.
The Control Panel - Controller Settings - Identity window is displayed.
Edit the name of the controller in the Controller Name field according to your requirement.
© Copyright 2018 ABB. All rights reserved.
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G