Changing Language - ABB IRC5 with FlexPendant Operating Manual

3.7.2.5 Changing language

Languages
The FlexPendant is installed with and supports twenty different languages. By
default, the current language is English.
Switching from one installed languages to another is easy. For more information,
see
Changing language
Use this procedure to change language on the FlexPendant.
1
2
3
4
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Changing language on page
Note
When you switch to another language, all buttons, menus and dialogs will use
the new language. RAPID instructions, variables, system parameters, and I/O
signals are not affected.
Action
On the ABB menu, tap Control Panel.
Tap Language.
A list of all installed languages is displayed.
Tap the language that you want to change to.
Tap OK. A dialog box is displayed. Tap Yes to proceed and restart the FlexPendant.
The current language is replaced by the selected one.
© Copyright 2018 ABB. All rights reserved.
3 Navigating and handling FlexPendant
3.7.2.5 Changing language
115.
115