Robotstudio Online - ABB IRC5 with FlexPendant Operating Manual

2.5 RobotStudio Online

Introduction to RobotStudio Online
RobotStudio Online is a suite of Windows Store applications intended to run on
Windows 10 tablets. It provides functionality for the shop floor commissioning of
robot systems.
You can run these apps on a tablet that communicates with the robot controller
wirelessly. To enable certain functionality, such as entering manual mode and
enabling power to the mechanical unit motors, you need a safety device that is
connected to the robot using the same plug that alternatively is used to connect
the FlexPendant.
The following RobotStudio Online apps are available in the Microsoft
Store:
RobotStudio Online Apps
xx1400002047
xx1400002049
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Note
Some of the functionality requires use of a safety device such as the T10 jogging
device or the JSHD4 three position safety device. For more information on T10,
see Operating manual - IRC5 with T10.
Note
You must have Windows 8.1 to run these Apps.
© Copyright 2018 ABB. All rights reserved.
2 Welcome to IRC5
2.5 RobotStudio Online
Description
Manage is a tool to manage IRC5 controllers
on a network.
Calibrate is a tool for calibration and defini-
tion of frames with IRC5 controllers.
Continues on next page
Windows
45