Handling Of Routines - ABB IRC5 with FlexPendant Operating Manual

5.3.3 Handling of routines

Overview
This section details how to handle program routines. i.e.:
Creating a new routine
This section details how to create a new routine, set the declaration, and add it to
a module.
1
2
3
4
5
6
7
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
• create a new routine
• create a copy of a routine
• change the declaration of a routine
• delete a routine
Action
On the ABB menu, tap Program Editor.
Tap Routines.
Tap File, then New Routine.
A new routine is created and displayed with default declaration values.
en0400000692
Tap ABC... and use the soft keyboard to enter the new routines' name. Then tap OK.
Select the type of routine:
• Procedure: used for a normal routine without return value
• Function: used for a normal routine with return value
• Trap: used for an interrupt routine
Do you need to use any parameters?
If YES; tap ... and proceed as detailed in section
page 158.
If NO; proceed to the next step.
Select module to add the routine to.
© Copyright 2018 ABB. All rights reserved.
5 Programming and testing
5.3.3 Handling of routines
Defining parameters in routine on
Continues on next page
157