Handling Inputs And Outputs, I/O; Viewing Signal Lists - ABB IRC5 with FlexPendant Operating Manual

7 Handling inputs and outputs, I/O

7.1 Viewing signal lists

Overview
I/O signal properties is used to view the input and output signals and their values.
Signals are configured with system parameters .
How to view signal lists
This section details how to view a list of signals.
1
2
Related information
Simulating and changing signal values on page
Filtering data on page
Configuring Most Common I/O on page
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Action
On the ABB menu tap Inputs and Outputs.
The list of Most Common I/O signals is displayed.
en0400000770
Tap View to change the selection of signals in the list.
Tip
Tap the Select Layout menu if you want to view signal labels in the list.
93.
© Copyright 2018 ABB. All rights reserved.
7 Handling inputs and outputs, I/O
7.1 Viewing signal lists
276.
114.
275