Production Window - ABB IRC5 with FlexPendant Operating Manual

3 Navigating and handling FlexPendant

3.2.5 Production Window

3.2.5 Production Window
Overview
The Production Window is used to view the program code while the program is
running.
Illustration Production Window
This section illustrates the Production Window.
en0400000955
Load Program
PP to Main
Debug
60
Load a new program.
Move the program pointer to the routine Main.
The Debug menu is available only in manual mode. Modify Position, see
Modifying positions in the Program Editor or Production Window on
page 264. Show Motion Pointerand Show Program Pointer, see
Program and Motion Pointers on page
Editor on page 63.
Note
The Visual Step mode icon indicates that the Step Into mode is not selec-
ted. This means that if the step mode is Step Out, Step Over, or Next
Move the Visual Step mode icon is displayed.
© Copyright 2018 ABB. All rights reserved.
167. Edit Program, see
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
About the
Program