Restore The System - ABB IRC5 with FlexPendant Operating Manual

9.3 Restore the system

When do I need this?
We recommend performing a restore:
During the restore, all system parameters are replaced and all the modules from
the backup directory are loaded.
The Home directory is copied back to the new system's HOME directory during
the restart.
Restore the system
This section describes how to restore the system.
1
2
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
• If you suspect that the program file is corrupt.
• If any changes made to the instructions and/or parameters settings did not
prove successful, and you want to return to the previous settings.
Action
On the ABB menu, tap Backup and Restore.
Tap Restore System.
The Restore System page is displayed.
xx0300000442
Note
If a default path has been defined as explained in the section
page 100, that path is displayed in the Backup folder path.
© Copyright 2018 ABB. All rights reserved.
9 Backup and restore
9.3 Restore the system
Setting default paths on
Continues on next page
291