Changing The Network Settings For Irc5 Controller Communication - ABB Fronius TPS 320i Applications Manual

7.2.2 Changing the network settings for IRC5 controller communication

Change the network settings for IRC5 communication
Follow these steps to change the network settings for IRC5 communication:
Application manual - Fronius TPS 320i/400i/500i/600i with RI-FB inside/i interface
3HAC065012-001 Revision: C
7.2.2 Changing the network settings for IRC5 controller communication
1 Connect to the Fronius service port with the Ethernet cable connected to
your PC:
xx2100000473
2 From a web browser address bar, enter the defined IP address (for example
192.168.125.65).
3 In the Fronius TPS/i browser, log on to the system using the default username
"admin" and default password "admin".
xx2100000471
4 In the Fronius web browser, select tab RI FB INSIDE/i.
© Copyright 2004-2021 ABB. All rights reserved.
7 Fronius EtherNet/IP configuration
Continues on next page
77