Defining An Additional Test View - ABB IRC5 with FlexPendant Operating Manual

3 Navigating and handling FlexPendant

3.7.1.5 Defining an additional test view

3.7.1.5 Defining an additional test view
Overview
If your system has a customized operator interface, that is one or several
applications developed with FlexPendant SDK, it is possible to enable the user to
start program execution in manual mode from such an application. If there is no
such application, however, the screen for adding other test views will look as in
the illustration below.
Defining an additional test view
Use this procedure to define an additional test view.
1
2
3
4
104
Action
On the ABB menu, tap Control Panel and then FlexPendant.
Tap Additional Test View.
The displayed screen might look like this:
en0600003110
Usually only the Program Editor and the Production Window are allowed test views.
In case there are additional views to choose from, these will appear in the list. Check
one or several applications to be used as additional test views.
Tap OK.
© Copyright 2018 ABB. All rights reserved.
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G