Backup And Restore; Back Up The System - ABB IRC5 with FlexPendant Operating Manual

9 Backup and restore

9.1 Back up the system

When do I need this?
We recommend performing a backup:
Back up the system
This section describes how to back up the system.
1
2
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
• Before installing new RobotWare.
• Before making any major changes to instructions and/or parameters to make
it possible to return to the previous setting.
• After making any major changes to instructions and/or parameters and testing
the new settings to retain the new successful setting.
Action
Tap the ABB menu and then tap Backup and Restore.
Tap Backup Current System.
The Backup Current System window is displayed.
If a default path has been defined as detailed in the section
page 100, this is displayed.
xx0300000441
Note
• By default, a name for the Backup folder is created which can be renamed by
the user later.
• While renaming, ensure that the name does not start with a space.
• If the folder name starts with a space, a warning dialog appears.
© Copyright 2018 ABB. All rights reserved.
9 Backup and restore
9.1 Back up the system
Setting default paths on
Continues on next page
287