Granting Access For Robotstudio - ABB IRC5 with FlexPendant Operating Manual

3.6.6 Granting access for RobotStudio

About write access on the controller
The controller accepts only one user with write access at a time. Users in
RobotStudio can request write access to the system. If the system is running in
manual mode, the request is accepted or rejected on the FlexPendant.
Granting access for RobotStudio
This procedure describes how to grant access for RobotStudio.
1
2
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Action
When a user in RobotStudio requests access, a message is displayed on the FlexPend-
ant. Decide whether to grant or reject access.
If you want to grant access, then tap Grant. The user holds write access until he dis-
connects or until you reject the access.
If you want to deny access, then tap Deny.
If you have granted access and want to revoke the access, tap Deny.
Note
For a system connected to T10, users in RobotStudio can request write access
by pressing the enabling device twice and logging in as a local client.
© Copyright 2018 ABB. All rights reserved.
3 Navigating and handling FlexPendant
3.6.6 Granting access for RobotStudio
97