Quickset Menu, Tasks - ABB IRC5 with FlexPendant Operating Manual

3 Navigating and handling FlexPendant

3.5.7 Quickset menu, Tasks

3.5.7 Quickset menu, Tasks
Tasks button
If you have the option Multitasking installed there can be more than one task.
Otherwise there is only one task.
By default, you can activate/deactivate only Normal tasks from the Quickset menu.
However, from the Control Panel, you can change the settings so that All tasks
can be activated/deactivated.
Activated tasks are started and stopped with the Start and Stop buttons on the
FlexPendant.
The tasks settings are only valid for manual operating mode.
Related information
Application manual - Controller software IRC5, section Multitasking.
How to start and stop multitasking programs is described in section
multitasking programs on page
TrustLevel for tasks are set with system parameters, see section Task in Technical
reference manual - System parameters.
You can define if all tasks or only normal tasks should be displayed. See section
Defining which tasks should be selectable in the tasks panel on page
88
245.
© Copyright 2018 ABB. All rights reserved.
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Using
107.