Defining A View To Be Shown During Operating Mode Change Or Startup - ABB IRC5 with FlexPendant Operating Manual

3.7.1.2 Defining a view to be shown during operating mode change or startup

View on operating mode change or startup
This function can be used, for example, if a view other than the Production Window
is desired when switching to Auto mode.
Defining view on operating mode change
Use the following procedure to configure the FlexPendant to automatically show
a specified view during a change in operating mode or during startup.
1
2
3
4
5
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
3.7.1.2 Defining a view to be shown during operating mode change or startup
Action
On the ABB menu, tap Control Panel and then tap FlexPendant.
Tap View on System Event.
The View on System Event window is displayed.
en0400001152
Tap the System Event list and select a type of system event.
Following are the available types:
• Switching to Auto: Select this option to define the FlexPendant view when
switching to auto mode.
• Switching to Manual: Select this option to define the FlexPendant view when
switching to manual mode.
• Switching to Manual Full Speed: Select this option to define the FlexPendant
view when switching to manual full speed mode.
• FlexPendant Startup: Select this option to define the view when the FlexPendant
starts.
In the Selected view field, tap ... and select a desired application to be displayed
during the selected system event.
Tap OK.
The changes are saved.
Note
The Clear View button will remove the currently selected view if you do not want
any view to be automatically shown.
© Copyright 2018 ABB. All rights reserved.
3 Navigating and handling FlexPendant
101