Viewing Signal Group - ABB IRC5 with FlexPendant Operating Manual

7.3 Viewing signal group

Viewing signal group
This section details how to view signal groups.
1
2
3
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Action
On the ABB menu, tap I/O.
A list of most common signals is displayed. See section
I/O on page 114.
In the View menu, tap Groups.
Tap on the signal group's name in the list and then tap Properties. Or tap twice on
the signal group's name.
The signal group's properties is displayed.
© Copyright 2018 ABB. All rights reserved.
7 Handling inputs and outputs, I/O
7.3 Viewing signal group
Configuring Most Common
279