Quickset Menu, Run Mode - ABB IRC5 with FlexPendant Operating Manual

3.5.4 Quickset menu, Run Mode

Run mode
By setting run mode you define if the program execution should run once and then
stop, or run continuously.
For information about run mode in:
Illustration Run mode
en0300000472
Single Cycle
Continuous
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
• Multitasking, see Application manual - Controller software IRC5, section
Multitasking.
• MultiMove, see Application manual - MultiMove, section User interface specific
for Multimove.
Runs one cycle then stops execution.
Runs continuously.
© Copyright 2018 ABB. All rights reserved.
3 Navigating and handling FlexPendant
3.5.4 Quickset menu, Run Mode
85