Filtering Data - ABB IRC5 with FlexPendant Operating Manual

3.6.4 Filtering data

Filtering data
In several of the FlexPendant menus you can use filtering. This can be useful when
you are looking at instances of a data type, for example, and there are more
available than is possible to overlook. By filtering instances starting with a specific
character for example, the number can be greatly reduced.
Depending on the type of data, you can filter data either alphabetically or
numerically.
Illustration of filtering
The filter function is switched on until the active filter is removed (For example, by
tapping Reset).
en0500001539
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Note
When filtering I/O signals there are more options than for many other types of
data. For example,
• you can filter data by Name or Category.
• filtering function can be displayed automatically if the number of signals
displayed exceeds a predefined number. See
display on page 95.
© Copyright 2018 ABB. All rights reserved.
3 Navigating and handling FlexPendant
Illustration of automatic filter
3.6.4 Filtering data
Continues on next page
93