Quickset Menu, Mechanical Unit - ABB IRC5 with FlexPendant Operating Manual

3.5.2 Quickset menu, Mechanical unit

Illustration Mechanical unit button
On the Quickset menu, tap Mechanical unit, then tap to select a mechanical unit.
en0300000539
A
B
C
D
E
F
G
H
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Mechanical unit menu button
Mechanical unit, a selected unit is highlighted. See
for jogging on page
Motion mode settings (axes 1-3 motion mode currently selected), further settings
are described in
Tool settings (tool 0 currently selected), further settings are described in
tion Tool settings on page
Work object settings (work object 0 currently selected), further settings are de-
scribed in Illustration Work object settings on page
Coordinate system settings (world coordinate currently selected), further settings
are described in
Turn coordination off , further settings are described in
page 83.
Show details, further settings are described in
page 83.
Note
The Mechanical unit menu is only available in manual mode.
© Copyright 2018 ABB. All rights reserved.
3 Navigating and handling FlexPendant
3.5.2 Quickset menu, Mechanical unit
132.
Illustration Motion mode settings on page
81.
Illustration Coordinate system settings on page
Selecting mechanical unit
80.
Illustra-
81.
82.
Turn coordination off on
Illustration Show Details on
Continues on next page
79