Basic Settings; Changing Brightness And Contrast - ABB IRC5 with FlexPendant Operating Manual

3.7.2 Basic settings

3.7.2.1 Changing brightness and contrast

Appearance options
This section describes the Appearance menu, where you can adjust the screen's
brightness and contrast. The contrast can only be adjusted on FlexPendant without
USB port.
Changing brightness and contrast
Use this procedure to change brightness and contrast of the screen.
1
2
3
4
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
Action
On the ABB menu, tap Control Panel.
Tap Appearance.
Tap the Plus or Minus button to adjust the levels. Tap Set Default to return to default.
The brightness and contrast changes as you change the levels which gives you an
instant view of how the new levels will affect the visibility.
Tap OK to use the new brightness and contrast levels.
Note
If you change brightness or contrast from the default levels, some screens can
appear to be striped. This is however not a sign of a faulty screen. Change back
to default settings to avoid the striped appearance.
© Copyright 2018 ABB. All rights reserved.
3 Navigating and handling FlexPendant
3.7.2.1 Changing brightness and contrast
109