Managing The Display Of Controller And System Name - ABB IRC5 with FlexPendant Operating Manual

3 Navigating and handling FlexPendant

3.7.1.8 Managing the display of controller and system name

3.7.1.8 Managing the display of controller and system name
Overview
You can manage the display of controller and system name using this feature.
Controller and System name
Use the following procedure to manage the display of controller and system name
in the status bar.
1
2
3
4
5
108
Action
On the ABB menu, tap Control Panel and then tap FlexPendant.
The FlexPendant Configuration Properties window is displayed.
Navigate and tap Controller and System Name.
The Controller and System Name window is displayed.
xx1700000330
Select a controller and system naming option according to your requirement.
Following are the available options and its description:
• Controller name only. (Default): Displays only the name of the controller in the
status bar. This is the default option.
• System name only: Displays only the name of the system in the status bar.
• Both Controller and System name: Displays both the controller and system
name in the status bar.
Tap OK.
The changes are applied and displayed in the status bar.
Tap Close.
© Copyright 2018 ABB. All rights reserved.
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G