Changing Programmable Keys - ABB IRC5 with FlexPendant Operating Manual

3 Navigating and handling FlexPendant

3.7.2.6 Changing programmable keys

3.7.2.6 Changing programmable keys
Overview
Programmable keys are four hardware buttons on the FlexPendant that can be
used for dedicated, specific functions set by the user. See
The keys can be programmed to simplify programming or testing of programs.
They can also be used to activate menus on the FlexPendant.
Change programmable keys
Use the following procedure to set the programmable keys:
1
2
3
4
5
Continues on next page
116
Action
On the ABB menu, tap Control Panel.
Tap ProgKeys.
en0400001154
Select key to set, Key 1-4 in the upper selection list.
Tap the Type menu to select type of action:
• None
• Input
• Output
• System
If Type Input is selected.
• Tap to select one of the digital inputs from the list.
• Tap the Allow in auto menu to select if the function is also allowed in automatic
operating mode.
Note
An input cannot be set by using the programmable keys, its value can only be pulsed.
The pulse will be the inverted value of the input.
© Copyright 2018 ABB. All rights reserved.
Hard buttons on page
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
39.